Milwaukee M18 Slim Hook with Magnetic 2 Bit Insert
The Milwaukee M18 Slim Hook is a great addition to most Milwaukee M18 tools. Do not be deceived by it’s name; though slim and narrow, it is still wide enough to hang on a ladder rail and many other items. It was designed to hang a little closer to the body than our original wide hook, making it easy to hang onto your pants, pocket or tool belt without looking down. With a gap of approximately 1 1/4” on most of the tools, the options are plentiful.
If you are tired of the skinny belt clips that you can purchase for the M18 tools, this is your answer. Keep your tool secure knowing that it will stay where you hang it. It will flex to fit on ladder rungs and 2 x lumber on edge.
It takes less than a minute to install with a 3/32 allen key and included screw and washer. It will fit the Milwaukee M18 tools with the “half hex-shaped bump” and mounting hole as circled in green in the pictures.
Made from Thermal Polyurethane, it is slightly flexible to absorb any accidental impacts on the job site. A hardened magnetic 2 bit insert comes pre-installed for rigidity where it’s needed. The hook will not fit when using the wider high output batteries.
The Slim Hook will fit the following tools (this is not an exhaustive list as we do not have access to all of the M18 tools):
2757-20 Impact Driver
2760-20 Hydraulic Driver
2853-20 Impact Driver
2805-20 Drill Driver
2804-20 Hammer Drill
2657-20 Impact Driver
2960-20 Impact Wrench
2803-20 Drill/Driver
2901-20 Drill/Driver
2606-20 Drill/Driver
2864-20 Impact Wrench
2866-20 Screw Gun
2767-20 Impact Wrench
2765-20 Impact Wrench
2708-20 Hole Hog
2627-20 Cut Out Tool
2550-20 Rivet Tool
Shipping and Taxes will be calculated at check out.
The Slim hook is designed for lighter tools like impacts and drills.
*Note - tools and bits pictured are not included with purchase
Do not overtighten screw - hand tight only.
The Milwaukee M18 Slim Hook is a great addition to most Milwaukee M18 tools. Do not be deceived by it’s name; though slim and narrow, it is still wide enough to hang on a ladder rail and many other items. It was designed to hang a little closer to the body than our original wide hook, making it easy to hang onto your pants, pocket or tool belt without looking down. With a gap of approximately 1 1/4” on most of the tools, the options are plentiful.
If you are tired of the skinny belt clips that you can purchase for the M18 tools, this is your answer. Keep your tool secure knowing that it will stay where you hang it. It will flex to fit on ladder rungs and 2 x lumber on edge.
It takes less than a minute to install with a 3/32 allen key and included screw and washer. It will fit the Milwaukee M18 tools with the “half hex-shaped bump” and mounting hole as circled in green in the pictures.
Made from Thermal Polyurethane, it is slightly flexible to absorb any accidental impacts on the job site. A hardened magnetic 2 bit insert comes pre-installed for rigidity where it’s needed. The hook will not fit when using the wider high output batteries.
The Slim Hook will fit the following tools (this is not an exhaustive list as we do not have access to all of the M18 tools):
2757-20 Impact Driver
2760-20 Hydraulic Driver
2853-20 Impact Driver
2805-20 Drill Driver
2804-20 Hammer Drill
2657-20 Impact Driver
2960-20 Impact Wrench
2803-20 Drill/Driver
2901-20 Drill/Driver
2606-20 Drill/Driver
2864-20 Impact Wrench
2866-20 Screw Gun
2767-20 Impact Wrench
2765-20 Impact Wrench
2708-20 Hole Hog
2627-20 Cut Out Tool
2550-20 Rivet Tool
Shipping and Taxes will be calculated at check out.
The Slim hook is designed for lighter tools like impacts and drills.
*Note - tools and bits pictured are not included with purchase
Do not overtighten screw - hand tight only.
The Milwaukee M18 Slim Hook is a great addition to most Milwaukee M18 tools. Do not be deceived by it’s name; though slim and narrow, it is still wide enough to hang on a ladder rail and many other items. It was designed to hang a little closer to the body than our original wide hook, making it easy to hang onto your pants, pocket or tool belt without looking down. With a gap of approximately 1 1/4” on most of the tools, the options are plentiful.
If you are tired of the skinny belt clips that you can purchase for the M18 tools, this is your answer. Keep your tool secure knowing that it will stay where you hang it. It will flex to fit on ladder rungs and 2 x lumber on edge.
It takes less than a minute to install with a 3/32 allen key and included screw and washer. It will fit the Milwaukee M18 tools with the “half hex-shaped bump” and mounting hole as circled in green in the pictures.
Made from Thermal Polyurethane, it is slightly flexible to absorb any accidental impacts on the job site. A hardened magnetic 2 bit insert comes pre-installed for rigidity where it’s needed. The hook will not fit when using the wider high output batteries.
The Slim Hook will fit the following tools (this is not an exhaustive list as we do not have access to all of the M18 tools):
2757-20 Impact Driver
2760-20 Hydraulic Driver
2853-20 Impact Driver
2805-20 Drill Driver
2804-20 Hammer Drill
2657-20 Impact Driver
2960-20 Impact Wrench
2803-20 Drill/Driver
2901-20 Drill/Driver
2606-20 Drill/Driver
2864-20 Impact Wrench
2866-20 Screw Gun
2767-20 Impact Wrench
2765-20 Impact Wrench
2708-20 Hole Hog
2627-20 Cut Out Tool
2550-20 Rivet Tool
Shipping and Taxes will be calculated at check out.
The Slim hook is designed for lighter tools like impacts and drills.
*Note - tools and bits pictured are not included with purchase
Do not overtighten screw - hand tight only.