Makita Slim Hook with Magnetic 2 Bit Insert (Ships Oct 15th)
The Makita Slim Hook is a great addition to most Makita cordless tools. Do not be deceived by it’s name; though slim and narrow, it is still wide enough to hang on a ladder rail and many other items. It was designed to hang a little closer to the body than our original wide hook, making it easy to hang onto your pants, pocket or tool belt without looking down. With a gap of approximately 1 1/4” on most of the tools, the options are plentiful.
If you are tired of the short & skinny belt clips that come with your Makita tool, this is your answer. Keep your tool secure knowing that it will stay where you hang it. It will flex to fit on ladder rungs and 2 x lumber on edge.
It takes less than a minute to install with a 3mm allen key and included screw and washer. It will fit most of the Makita cordless tools that come with the standard belt clip and has the same shape as circled in the pictures- do not overtighten the screw.
Made from Thermal Polyurethane, it is slightly flexible to absorb any accidental impacts on the job site. A hardened magnetic 2 bit insert comes pre-installed for rigidity where it’s needed.
The Slim Hook will fit the following tools (this is not an exhaustive list as we do not have access to all of the Makita cordless tools):
DFN350 - 18g Finish Nailer
DRT353 - 23g Pin Nailer
DTD152 - 1/4” Impact Driver
DTD153 - 18V Brushless Impact Driver
DTW285XV - 1/2” Impact Wrench
DTD171 - 1/4” Impact Driver
DDF453 - 1/2” Drill
DDF482 - 18V Drill/Driver
DDF483 - 1/2” Brushless Drill
DDF485 - 1/2” Brushless Drill
DHP481 - Brushless Hammer Drill
DHP482 - 18V Hammer Drill Driver
DHP483 - Brushless Hammer Drill
DHP484 - Brushless Hammer Drill Driver
DHP485 - 1/2” Brushless Hammer Drill
TD110D - 12V 1/4” Impact Driver
DTD155 - 18V Impact Driver
DF331D - 12V 3/8” Drill
DF332D - 3/8” Cordless Drill
DF333D - 3/8” Cordless Drill/Driver
The Slim hook is designed for lighter tools like impacts and drills.
Shipping and Taxes will be calculated at check out.
*Note - tools pictured are not included with purchase
Do not overtighten screw - hand tight only.
The Makita Slim Hook is a great addition to most Makita cordless tools. Do not be deceived by it’s name; though slim and narrow, it is still wide enough to hang on a ladder rail and many other items. It was designed to hang a little closer to the body than our original wide hook, making it easy to hang onto your pants, pocket or tool belt without looking down. With a gap of approximately 1 1/4” on most of the tools, the options are plentiful.
If you are tired of the short & skinny belt clips that come with your Makita tool, this is your answer. Keep your tool secure knowing that it will stay where you hang it. It will flex to fit on ladder rungs and 2 x lumber on edge.
It takes less than a minute to install with a 3mm allen key and included screw and washer. It will fit most of the Makita cordless tools that come with the standard belt clip and has the same shape as circled in the pictures- do not overtighten the screw.
Made from Thermal Polyurethane, it is slightly flexible to absorb any accidental impacts on the job site. A hardened magnetic 2 bit insert comes pre-installed for rigidity where it’s needed.
The Slim Hook will fit the following tools (this is not an exhaustive list as we do not have access to all of the Makita cordless tools):
DFN350 - 18g Finish Nailer
DRT353 - 23g Pin Nailer
DTD152 - 1/4” Impact Driver
DTD153 - 18V Brushless Impact Driver
DTW285XV - 1/2” Impact Wrench
DTD171 - 1/4” Impact Driver
DDF453 - 1/2” Drill
DDF482 - 18V Drill/Driver
DDF483 - 1/2” Brushless Drill
DDF485 - 1/2” Brushless Drill
DHP481 - Brushless Hammer Drill
DHP482 - 18V Hammer Drill Driver
DHP483 - Brushless Hammer Drill
DHP484 - Brushless Hammer Drill Driver
DHP485 - 1/2” Brushless Hammer Drill
TD110D - 12V 1/4” Impact Driver
DTD155 - 18V Impact Driver
DF331D - 12V 3/8” Drill
DF332D - 3/8” Cordless Drill
DF333D - 3/8” Cordless Drill/Driver
The Slim hook is designed for lighter tools like impacts and drills.
Shipping and Taxes will be calculated at check out.
*Note - tools pictured are not included with purchase
Do not overtighten screw - hand tight only.
The Makita Slim Hook is a great addition to most Makita cordless tools. Do not be deceived by it’s name; though slim and narrow, it is still wide enough to hang on a ladder rail and many other items. It was designed to hang a little closer to the body than our original wide hook, making it easy to hang onto your pants, pocket or tool belt without looking down. With a gap of approximately 1 1/4” on most of the tools, the options are plentiful.
If you are tired of the short & skinny belt clips that come with your Makita tool, this is your answer. Keep your tool secure knowing that it will stay where you hang it. It will flex to fit on ladder rungs and 2 x lumber on edge.
It takes less than a minute to install with a 3mm allen key and included screw and washer. It will fit most of the Makita cordless tools that come with the standard belt clip and has the same shape as circled in the pictures- do not overtighten the screw.
Made from Thermal Polyurethane, it is slightly flexible to absorb any accidental impacts on the job site. A hardened magnetic 2 bit insert comes pre-installed for rigidity where it’s needed.
The Slim Hook will fit the following tools (this is not an exhaustive list as we do not have access to all of the Makita cordless tools):
DFN350 - 18g Finish Nailer
DRT353 - 23g Pin Nailer
DTD152 - 1/4” Impact Driver
DTD153 - 18V Brushless Impact Driver
DTW285XV - 1/2” Impact Wrench
DTD171 - 1/4” Impact Driver
DDF453 - 1/2” Drill
DDF482 - 18V Drill/Driver
DDF483 - 1/2” Brushless Drill
DDF485 - 1/2” Brushless Drill
DHP481 - Brushless Hammer Drill
DHP482 - 18V Hammer Drill Driver
DHP483 - Brushless Hammer Drill
DHP484 - Brushless Hammer Drill Driver
DHP485 - 1/2” Brushless Hammer Drill
TD110D - 12V 1/4” Impact Driver
DTD155 - 18V Impact Driver
DF331D - 12V 3/8” Drill
DF332D - 3/8” Cordless Drill
DF333D - 3/8” Cordless Drill/Driver
The Slim hook is designed for lighter tools like impacts and drills.
Shipping and Taxes will be calculated at check out.
*Note - tools pictured are not included with purchase
Do not overtighten screw - hand tight only.