Magnetic Fastener Caddy
Do your fasteners constantly break when they’re in your tool belt or there just isn’t a perfect spot for them? We’ve got the perfect solution - the magnetic fastener caddy.
We developed this caddy so that you can clip it on your belt, tool bag or simply put it into a tool bag compartment to keep fasteners from breaking into little pieces. Our flexible caddy measuring at 2 5/8” x 1 1/4” x 3 1/4” deep (68mm x 34mm x 90mm deep) is suitable for a variety of fastener types found on the job site. Put your tacker staples, crown staples, and finish nails in your pouch without the worry of them breaking apart.
There is a magnet imbedded into the bottom of the caddy so that the fasteners will stay in there if you choose to jump or tip it slightly.
Our caddy is made with thermal polyurethane. There is not need to worry about it breaking as the material is stiff, but flexible. The built in clip will accommodate up to a 2” belt, or clip onto any divider in your tool bag. Built in drain holes prevent water and sawdust from collecting in the bottom.
Holes near the bottom allow you to blow out metal shavings easily.
Shipping and Taxes calculated at check out.
*Note - tool bags and fasteners not included with purchase
Do your fasteners constantly break when they’re in your tool belt or there just isn’t a perfect spot for them? We’ve got the perfect solution - the magnetic fastener caddy.
We developed this caddy so that you can clip it on your belt, tool bag or simply put it into a tool bag compartment to keep fasteners from breaking into little pieces. Our flexible caddy measuring at 2 5/8” x 1 1/4” x 3 1/4” deep (68mm x 34mm x 90mm deep) is suitable for a variety of fastener types found on the job site. Put your tacker staples, crown staples, and finish nails in your pouch without the worry of them breaking apart.
There is a magnet imbedded into the bottom of the caddy so that the fasteners will stay in there if you choose to jump or tip it slightly.
Our caddy is made with thermal polyurethane. There is not need to worry about it breaking as the material is stiff, but flexible. The built in clip will accommodate up to a 2” belt, or clip onto any divider in your tool bag. Built in drain holes prevent water and sawdust from collecting in the bottom.
Holes near the bottom allow you to blow out metal shavings easily.
Shipping and Taxes calculated at check out.
*Note - tool bags and fasteners not included with purchase
Do your fasteners constantly break when they’re in your tool belt or there just isn’t a perfect spot for them? We’ve got the perfect solution - the magnetic fastener caddy.
We developed this caddy so that you can clip it on your belt, tool bag or simply put it into a tool bag compartment to keep fasteners from breaking into little pieces. Our flexible caddy measuring at 2 5/8” x 1 1/4” x 3 1/4” deep (68mm x 34mm x 90mm deep) is suitable for a variety of fastener types found on the job site. Put your tacker staples, crown staples, and finish nails in your pouch without the worry of them breaking apart.
There is a magnet imbedded into the bottom of the caddy so that the fasteners will stay in there if you choose to jump or tip it slightly.
Our caddy is made with thermal polyurethane. There is not need to worry about it breaking as the material is stiff, but flexible. The built in clip will accommodate up to a 2” belt, or clip onto any divider in your tool bag. Built in drain holes prevent water and sawdust from collecting in the bottom.
Holes near the bottom allow you to blow out metal shavings easily.
Shipping and Taxes calculated at check out.
*Note - tool bags and fasteners not included with purchase